Analisis Pengendalian Kualitas Dengan Metode Failure Mode and Effect Analysis (FMEA) Pada Produk Pail Varian 1 Kg
DOI:
https://doi.org/10.56655/winco.v3i1.174Keywords:
control, quality, FMEA, RPNAbstract
Quality Control is used to prevent product failures (defects), repeat the production process, decrease selling prices to prevent product failures (reject). Failure Mode And Effect Analysis (FMEA) is one method that can be used in quality control analysis by identifying potential failures that will arise and minimizing the risk of defects. The results of the analysis and data processing in this study used the FMEA method. Based on the results of the analysis, the researchers found three defects, namely Flashing, Short Shot, and IML that did not meet the standards. Then for data processing using the FMEA method, the highest RPN or Risk Point Number was found in the Human factor and the cause of disability, namely the machine settings were not in accordance with the RPN 20 value.
References
H. Ardiwijayanta, “Pengendalian Mutu Dengan Metode Acceptance Sampling di PT. Kencana Gemilang,” 2017.
W. Oktavianus and D. Caesaron, “Analisis Pengendalian Kualitas Cacat Dengan Metode Six Sigma Pada Perusahaan Percetakan (Studi Kasus: PT. Delta Mandiri),” 2016.
P. B. Crosby, Quality Is Free. 1979.
J. M. Juran, Quality is Fitness for Use. 1992.
W. E. Deming, Total Quality Management Thinker. 1982.
David Garvin, Competing on the eight dimensions of quality. 1987.
D. G. Tambunan, B. Sumartono, and D. H. Moektiwibowo, “Analisis Pengendalian Kualitas Dengan Metode Six Sigma Dalam Upaya Mengurangi Kecacatan Pada Proses Produksi Koper di PT SRG,” 2018.
R. K. Amin, “Analisa Pengendalian Kualitas Produk Seksi M/C Crank Shaft Di PT. Astra Honda Motor,” Jakarta, 2017.
V. Gaspersz, Total Quality Management. 2002.
K. Rujianto and H. C. Wahyuni, “Pengendalian Kualitas Produk Dengan Menggunakan Metode SQC dan HRA Guna Meningkatkan Hasil Produksi Tahu di IKM H. Musauwimin,” PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 2, no. 1, pp. 1–11, Jun. 2018, doi: 10.21070/prozima.v2i1.1065.
N. Andri, “Pengendalian Kualitas Produk Baja Menggunakan Metode Statistical Quality Control (SQC) Dan Failure Mode Effect Analysis (FMEA) di PT XYZ,” 2018.
A. Suherman and B. J. Cahyana, “Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis (FMEA) Dan Pendekatan Kaizen untuk Mengurangi Jumlah Kecacatan dan Penyebabnya,” 2019.
Mahmud, “Analisa Pengendalian Kualitas Dengan Menggunakan Metode FMEA (Failure Mode and Effect Analysis) Pada Produk Front Fender 1PA di PT. Takagi Sari Multi Utama,” 2018.
J. Elbert, “Pengendalian Kualitas Menggunakan Metode FMEA (Failure Mode and Effect Analysis) DI PT. Asia Mandiri Lines Surabaya,” 2018. [Online]. Available: http://www.beritasatu.com/ekonomi/353695-
V. Gaspersz, Sistem Manajemen Kinerja Terintegrasi Balanced Scorecard Dengan Six Sigma Untuk Organisasi Bisnis dan Pemeritah. 2005.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Raedho Raedho, Tofik Hidayat
This work is licensed under a Creative Commons Attribution 4.0 International License.
